UF Membrane

XUF1050C replace HYDRA cap max40 It is made of hollow fiber PVDF material, which has high tensile strength. The 0.03um pore size provides the same water production flux as the original Hyderamide ultrafiltration module.

X Membrane UF51 ultrafiltration membrane is a capillary hollow fibre membrane, which is a kind of polymer material membrane, it is a kind of separation product without phase change. The modified PVDF material used in this product has good water permeability, mechanical properties, chemical resistance and anti-pollution ability. The membrane module is installed with hollow membrane filament with inner diameter of 0.8mm and outer diameter of 1.3mm. The filtration method is out-side in, the raw water is driven by the pressure difference and enters into the inner part of the hollow filament, and permeates through the hollow filament along the radial direction from the inside to the outside. That is, the raw water is driven by the pressure difference, enters the outside of the hollow wire, and penetrates through the hollow wire along the radial direction from the outside to the inside, so that various harmful substances such as bacteria, colloids, suspended substances and microorganisms in the raw water can be filtered.                    

X membrane module adopts PVDF hollow fiber ultrafiltration membrane prepared by advanced thermotropic phase separation method, with homogeneous sponge structure, featuring high strength, large flux, chemical resistance and recoverability. Submerged membrane module skid set aeration pipeline, water production pipeline in one, the whole submerged in the filtration of water, membrane operation environment visualization is conducive to the stable operation of the membrane.

Ultrafiltration membrane separation technology introduction These UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Ultrafiltration membrane separation technology introduction Ultrafiltration membrane is a separation process based on the principle of sieving, which uses pressure as the driving force to achieve mechanical separation.