UF Membrane

X-HFU-2020N replacement for Toray HUNF2020N Ultrafiltration Membrane Overview. This filtration mode gives ultrafiltration membranes the advantages of easy operation and low energy consumption.  

The X-UF-10600(ZW700B) Environmental protection As a pioneer of membrane technology, X brand (suez) leverages decades of research, development, and operational experience to offer the most advanced ultrafiltration technology in the market.

The X-UF-0770(ZW1500) Tips(Hot method) Membrane Inside-out Outside-in Pvdf Uf membrane . Each membrane module has a nominal membrane area of 55.7 square metres (600 square feet).metres (600 square feet)

Features of JX Thermally Induced Phase Separation (TIPS) UF membrane   High permeate flux is achieved by the use of membrane with exceptionally high permeability. It is possible to set the design flux at 5-6m3/m2/day. With clean feed water such as underground water ,pretreated water , etc.

Features of JX Thermally Induced Phase Separation (TIPS) UF membrane   High permeate flux is achieved by the use of membrane with exceptionally high permeability. It is possible to set the design flux at 5-6m3/m2/day. With clean feed water such as underground water ,pretreated water , etc.

China X UF Membrane PVDF Factory Price Ultrafiltration 0.02Micron For Water Filtration Module   Ultrafiltration is one membrane filtration process that serves as a barrier to separate harmful bacteria, viruses, and other contaminants from clean water. An ultrafiltration water system forces water through 0.02 micron membrane. Suspended particles that are too large to pass through the membrane stick to the outer membrane surface. Only fresh water and dissolved minerals pass through. At present, the commonly used ultrafiltration membranes in industrial production are: plate and frame type, circular tube type, spiral wound type, hollow fiber type, and capillary type. Various industries must choose different types of ultrafiltration membranes according to their needs to give full play to their performance

China X brand Reuse of Resources UF Membrane PVDF Factory Price Ultrafiltration 0.02Micron For Water Filtration Module   Ultrafiltration is one membrane filtration process that serves as a barrier to separate harmful bacteria, viruses, and other contaminants from clean water. An ultrafiltration water system forces water through 0.02 micron membrane. Suspended particles that are too large to pass through the membrane stick to the outer membrane surface. Only fresh water and dissolved minerals pass through. At present, the commonly used ultrafiltration membranes in industrial production are: plate and frame type, circular tube type, spiral wound type, hollow fiber type, and capillary type. Various industries must choose different types of ultrafiltration membranes according to their needs to give full play to their performance

X250XL replacement for INGE Effective water treatment usually requires a combination of different methods and technologies.This combination depends on the destination of the purified water (e.g. drinking water, industrial process water for power stations, etc.) as well as the quality and degree of contamination of the raw water.

UF0860 replacement for DOW SFP2860 Ultrafiltration membrane belongs to capillary hollow fiber membrane,It is a polymer material membrane,It is a separation product without phase change.With the material of modified PVDF and PES, It has good water permeability, mechanical properties, chemical resistance and pollution resistance. The Module type is Outside-in(PVDF) and Inside-out(PES). It can filter various harmful substances such as bacteria, colloids, suspended solids and microorganisms which are in the feed water.

Ultrafiltration membrane system is a solution separation device with ultrafiltration membrane filament as the filtration medium and the pressure difference between the two sides of the membrane as the driving force.

Features of JX Thermally Induced Phase Separation(TIPS) Uf membrane   High permeate flux is achieved by the use of membrane with exceptionally high permeability. It is possible to set the design flux at 5-6m3/m2/day. With clean feed water such as underground water ,pretreated water , etc.

Features of JX Thermally Induced Phase Separation(TIPS) Uf membrane   High permeate flux is achieved by the use of membrane with exceptionally high permeability. It is possible to set the design flux at 5-6m3/m2/day. With clean feed water such as underground water ,pretreated water , etc.

The UNA Series (hollow fiber filtration) modules are designed for reverse osmosis (RO) pretreatment applications. AriaSM systems incorporating UNA modules can replace conventional upstream operations such as flocculation, settling and granular media filtration. The modules provide consistent high-quality effluent, independent of incoming raw water quality without the use of coagulating chemicals, typically achieving a SDI of < 2 – 3 and a turbidity of < 0.08 NTU. These robust Aria systems have a comparatively small footprint, are modular in design, and are fully automated. They may be easily incorporated into the existing DI water infrastructure.

UF0880 replacement for DOW SFP2880 Ultra Filtration membrane module made by PVDF material hollow fiber tubes, and cover is PVC shell. These UF membranes are characterized by Antibacterial function.(especially good for removing particulate, virus , colloid, albumin protein, gelatin, carbon black, organic compound.......)

Features of JX Thermally Induced Phase Separation(TIPS) Uf membrane   High permeate flux is achieved by the use of membrane with exceptionally high permeability. It is possible to set the design flux at 5-6m3/m2/day. With clean feed water such as underground water ,pretreated water , etc.

Replace HYDRA cap max80 It is made of hollow fiber PVDF material, which has high tensile strength. The 0.08um pore size provides the same water production flux as the original Hyderamide ultrafiltration module.